Shotlore Field: the guide

Last updated 10 November 2026 · Shotlore Field 1.5 · iPhone and iPad (iOS 17 or later) and Android (8 or later)

Shotlore Field is the free phone companion to Shotlore on a Mac or PC. It records where you were all day, the places you named and the moments that mattered, and it carries the crew's working tools: day plans, shot lists, safety and check-ins, permits, drone, camera and sound logs, scout reports, sightings, releases, receipts and kit. No account, and almost all of it works with no signal.

Every tool below is written as a procedure: what it's for, what to set up first, the steps in order with the words you'll see on screen, what you end up with and where it goes. Where iPhone and Android differ, it says so.

Each tool is marked with the Field version it arrived in; Field 1.6 is the current version, free on Google Play for Android and through TestFlight on iPhone and iPad. Releases and camera and sound takes reach the computer with Shotlore 0.7.7 or later; the card log round trip needs Shotlore 0.7.9. Get the app.

From the phone to the rushes

What it's for: the whole day, from the first clock photo to files that arrive in the edit already placed, named, credited and logged.

  1. Before the shoot: install Field on every phone that will log anything, and pick each person's role (First run). If the office uses a production briefing pack, each phone opens it from the link or the shoot folder (Settings › Shoot). From 1.5, a pack from a company on Shotlore's Company licence shows the company's name and logo at the top of the pack and the Shoot screen.
  2. Start of the day: start recording (Record the day), then photograph Show the clock with every camera (Show the clock). This is what lets Shotlore set each camera's clock.
  3. During the day: name the places you work in (Name this place) and log as you go: the shot log (Shot log), camera report takes with their clip names (Camera report), sound takes with their file names (Sound log), sightings, scout spots you add to your places, and releases signed on the phone (Releases). Each entry keeps its time and position.
  4. End of the day: stop recording, and send the day to the computer by one of the routes in Sending days to the computer: Share with Shotlore over Wi-Fi (any phone), iCloud Drive (iPhone), the production's shoot folder (any phone), or the day sent as a file.
  5. In Shotlore, Files & track: add the card folders, then add the day: Use them when Shotlore offers matching Field days, Get days from a phone… for the Wi-Fi link, or Add GPX files… for a sent file. The log lists what came with the day: places, shot log entries, releases and takes. See the manual's Files & track.
  6. Camera clocks: Shotlore reads the clock photos and sets each camera's offset. Releases and the shot log are matched to files by this corrected time, so check every camera has a clock before going on.
  7. Credits & places: the places you named become each file's location, and the Releases panel lists the releases from the phones and the files each one covers. Save credits writes credits, places and the release fields into the stills. See the manual's Credits & places.
  8. Deliver: camera and sound takes have already filled in scene, take, circled and notes on the clips they name. Export the shot log, Avid ALE, Resolve, Premiere or Final Cut files, XMP sidecars and the library manifest; the release register (releases.csv) is saved with them. See the manual's Deliver.

What stays on the phone: PDFs (day plans, risk assessments, scout reports, the signed release forms with their signatures and contact details), receipts, kit lists, permits, drone logs and the battery board. Share those from the tool itself.

If it goes wrong: a file with no clock setting can't be matched to anything by time. Fix the camera's clock in Shotlore first, then go back to Credits & places.

First run: your role 1.2

What it's for: showing each person only the tools their job uses.

  1. Open Field. It asks What do you do on a shoot?
  2. Pick one or more of the 14 roles: Producer; Production manager / coordinator; Director; Assistant director; DP / camera operator; Camera assistant / DIT; Gaffer / grip; Drone pilot; Sound recordist; Stills photographer; Location manager / scout; Fixer / driver; Ranger / guide; Researcher / field assistant.
  3. Tap Start, or Show everything to see every tool.

What you get: everyone has places, maps, safety, sun and moon, and weather; your roles add the rest. To change it later: Settings › My role, or switch single tools on and off in Settings › What to show, where Everything, Keep it simple and My role's set set them all at once. The set in use is filled in with a tick; after switching things by hand it says "Your own mix" (1.5).

If it goes wrong: a tool in this guide that you can't see is switched off. Turn it on in What to show. Hiding a tool never deletes its data.

Finding your way round

Record the day 1.0

What it's for: the GPS track that places every photo and clip shot that day.

Before you start: allow location when asked: on iPhone and iPad While Using the App with Precise Location on (recording still carries on with the screen locked); on Android precise location, and notifications, so the recording notification can show.

  1. Tap the round button on the Record card (Android: Start recording on Today) and pocket the phone. It keeps a position every few seconds or metres, with the screen off, and drops poor fixes (rougher than about 65 m). On iPhone and iPad, a line under the button says how accurate the position is and why points aren't being saved.
  2. At the end of the day tap it again (Android: Stop recording).
  3. The day is kept in Days. Send it to the computer (Sending days to the computer).

Settings › Track sets how often (every 5 s to 5 min, or when you've moved 25 to 250 m) and the accuracy.

Recording hours (Shoot schedules before 1.6): Recording hours › Set the hours for a shoot. Set the dates, rest days, the hours to record (or sunrise to sunset, or round the clock) and the Time zone, then Switch this schedule on. Recording stops at the end of shoot hours and location is off between them. On iPhone and iPad, a notification at the start of each shoot day asks you to open the app, and recording starts when you do (or by itself if the app is already open); on Android, recording starts by itself at shoot hours.

If it goes wrong: a gap in the track usually means the phone had no view of the sky (indoors, in a bag under kit), Precise Location was off, or the phone's battery saver stopped the app (Android: set its battery use to Unrestricted). On an iPad, only a Wi-Fi + Cellular model has GPS.

Name this place 1.0

What it's for: giving everything shot in one spot the right location name in Shotlore.

  1. Tap Name this place (Android: Name this place…). Wait for the position to settle.
  2. Type a name and choose How big is it?: 100 m, 300 m, 1 km or 3 km.
  3. Tick Sensitive place for nests, dens and the like, so its exact position is kept out of exports.
  4. Add Reference photos if you like (iPhone: Photo of this place opens the camera first; Android: camera or gallery).
  5. Tap Save.

What you get: the place travels with the day. In Shotlore it becomes a named place, and every file shot inside it takes the name as its location (the manual's Credits & places).

Show the clock 1.0

What it's for: setting every camera's clock in Shotlore from one photo, so files land on the track at the right moment.

  1. Open Show the clock (Android: the Clock tab). It shows a full-screen code of the exact time.
  2. Photograph it with each camera at the start of the day. On a video camera, film it for a few seconds.
  3. In Shotlore, the clock photo sets that camera's offset (Camera clocks).

shotlore.app/clock shows the same clock in any browser, for a second phone or a laptop.

Shot log 1.0

What it's for: marking moments as they happen, so they land on the clips shot at that time.

  1. On the Shot log bar, tap Good take, Card (a card change), Sighting or Note. From 1.6, with the Camera report or Sightings switched on, Card and Sighting open that tool's own form, so the card log and the species log get the same record.
  2. Voice records a voice note and writes the words out after you stop, for you to check before saving: on iPhone and iPad, and from 1.6 on Android 13 or later where the phone has on-device speech recognition (the words are worked out on the phone; the recording never goes to an online service). Where it can't, the recording is still saved.

What you get: each entry keeps its time and position and travels with the day. Shotlore puts it on the clips shot at that moment, as Field notes in the shot log and on the card. Crew without the app can mark takes at shotlore.app/mark in any phone browser.

Who has the camera, and who you're with 1.6

What it's for: on a crew that shares cameras or splits up, telling Shotlore who had each camera when, and whose track to use when a phone wasn't recording.

  1. Hand over a camera: under the Shot log buttons tap Hand over a camera…, name the kit the way you'd say it (FX6, A7S III, Mavic 3, or its serial) and pick who has it now. Use the same name each time. Do it each time it changes hands; logging a card as In camera in the card log counts too.
  2. I'm with…: if your phone is nearly flat or isn't recording, tap I'm with… and pick the colleague you're staying with. Field offers this by itself when the battery drops under 15% while recording, or when it's inside your recording hours and the track isn't running.

Both buttons show once you're on a crew: joined in My crew, or in a production's briefing pack. Working alone, they're hidden.

What you get: both are notes in the shot log, so they travel with the day, even from a phone that recorded no track. On a crew, everyone gets a notice ("Richard handed the FX6 to Joseph", "Richard isn't recording a track. With Joseph from now"), so the coordinator sees it. In Shotlore, each file goes to whoever had its camera when it was shot (a name you set for a card by hand still wins), and under the tracks Fill from… offers the colleague's track for the files that otherwise have no position at all. Nothing is filled without someone choosing it, and Shotlore's shoot report says which files were placed from whose track.

If it goes wrong: when Shotlore can't tell which camera a kit name means (a drone, whose files carry a code such as FC3582, or a camera the crew calls "A"), Who shot what asks which camera it is, once, and keeps the answer with the job.

Sending days to the computer 1.0

What it's for: getting the day (track, places, photos, shot log, and from 1.4.1 releases and camera and sound takes) into Shotlore. Pick one route.

Share with Shotlore, any phone, any computer 1.4

  1. Put the phone and the computer on the same Wi-Fi, or the computer on the phone's hotspot.
  2. On the phone: Days › Share with Shotlore…. Keep that screen open.
  3. In Shotlore, Files & track: Get days from a phone…. The phone appears by name; enter the Pairing code shown on the phone, once.
  4. After pairing, one click copies every day, photo and voice note. Add the days to the job.

iPhone with iCloud Drive

  1. Sign in to iCloud on the iPhone with the same Apple Account as the Mac, with iCloud Drive on.
  2. Leave Settings › Share with Shotlore through iCloud Drive on. Each day is saved to iCloud Drive › Shotlore Field as it goes.
  3. On the Mac, Files & track offers the days that match the job: choose Use them. Places you name on the Mac come back to the phone.

The production's shoot folder 1.4: with a briefing pack from the office, Days › Send to production writes your day into the shared folder, and the coordinator's Shotlore reads the whole crew's days from it (the manual's Shoot sync).

As a file: on iPhone, open a day in Days and Send it (AirDrop, Messages, email). On Android, in Days, Send… (WhatsApp, Gmail, Drive, Quick Share) or Save to Files…, or on Today Send today to the Mac or the producer. In Shotlore add it with Add GPX files….

If it goes wrong: if the phone doesn't appear by name, type the address the phone's screen shows into Shotlore; on a Mac, allow Shotlore to find devices on the local network when macOS asks. A day sent to Shotlore 0.7.6 or older still arrives, but its releases and takes show only as Field notes: update Shotlore to 0.7.7.

Find your way back 1.0 1.1

What it's for: getting back to a place, or out again, with no signal. The offline map is a country map you download once, which then works with no signal: on Android in Settings › Maps (or the button on any map), and from 1.6 on iPhone and iPad in Settings › Offline maps. It has roads, rivers and place names but no satellite imagery.

Offline maps on iPhone and iPad 1.6: Settings › Offline maps lists the map for where you are and every country (big countries come in parts). Tap Get, check the size, and keep Field open on Wi-Fi until it finishes. Then open Map of the day and tap Offline map to see the day's track and places on it with no signal. Swipe a map to delete it; Update appears when a newer monthly build is out. Maps come from GitHub, which sees the phone's internet address and which map was fetched, and nothing else.

  1. Open Find your way back. Map of the day shows today's trail on a satellite map; Where was this photo taken? finds a photo's spot; All my places lists your places, nearest first.
  2. Tap a place, then Retrace my steps here. Choose On foot or By vehicle. Field follows the tracks you and your crew have travelled, round any trail reports, with optional spoken directions (Settings › Spoken directions).
  3. Or use the Straight-line arrow, Directions in Maps, or Send to a teammate.
  4. From the day's map: tap the track for Retrace to here, or use Back to the start.

Also: Routes: known tracks & area packs imports and shares tracks for an area (Import tracks or an area pack). Trail reports warns others of a fallen tree, high water, mud, a washed-out road, a locked gate or wildlife, until someone marks it It's clear now; Report a problem here adds one at a place.

If it goes wrong: retracing needs a recorded track that reaches the place. Where there's none, use the arrow.

Sun, moon, tides and weather 1.0

What it's for: planning around the light.

  1. Open Sun, moon & tides (Android: the Sky tab). It shows first and last light, golden and blue hour, sunrise and sunset with their bearings, moonrise, moonset and phase, for where you are.
  2. Tap Change place for anywhere else, and drag the scrubber to move through the day.

Both phones also work out tides (near the coast, from the nearest of about 3,000 gauges, with no signal), the night sky (fully dark, dark with no moon, the Milky Way core) and the light on your subject, and show the weather with a drone verdict: Apple Weather on iPhone, MET Norway on Android once you switch it on. On iPhone also Save plan, which keeps the plan with a named place.

From 1.6, on iPhone and Android, all worked out on the phone with no signal:

Camera tools 1.0

What it's for: quick sums on set.

  1. Open Camera tools (Android: the Tools tab) and pick depth of field, ND filter, shutter angle, timelapse or card capacity.
  2. Lock the values that must stay put; the free one follows as you change the others.

My crew (Crew online) 1.6

What it's for: one crew across iPhones, Android phones and the production's computers: check-ins with overdue alerts, notices, day plans, places, trail reports and, if each person chooses, a live crew map. Everything goes through Shotlore's crew relay sealed with the shoot's key, which only the crew has; the relay can't read names, tracks, positions or messages, and keeps them 30 days after the last change.

  1. Whoever starts it: on Android, Tools › My crew, type your name and tap Start a crew; on iPhone, Tools › My crew › start a crew shoot. A production on Shotlore can start one from its briefing pack instead.
  2. Invite: show the invite QR code, or Share the invite link by WhatsApp, Messages or email. Anyone with the link can join and read the crew's items, so send it only to the crew.
  3. Crew: scan the QR code in Field (Android: Scan the invite QR code; iPhone: My crew › Scan an invite), or open the link on the phone, or paste it and tap Join. Your name in Settings is your name on the crew; change it there and the crew sees the new one.
  4. Check-ins: I'm going out with where to and when you'll be back, I'm back, or I need help. The crew's phones are told; if you're past your time, everyone gets an overdue alert and a red card with Find them. On Android 1.6 (build 21) a crew member can mark an overdue card Seen, which keeps it as a line until you check in, and the crew's owner can Clear for everyone.
  5. Notices and plans: type a Notice for the crew; send a day plan, a place or a trail report, and tap Got it on a plan sent to you.
  6. Live crew map (optional): switch on Share my position with the crew. Nothing is sent until you start recording, only inside shoot hours and never from a sensitive place; the relay keeps only your latest position for a few minutes. Open the crew map shows everyone who shares.
  7. At the end: Leave crew, or the owner taps End the shoot for everyone, which removes everything from the relay.

Crew shoots started before 1.6 on iPhone through the producer's iCloud keep working until they end; new crews use Crew online, so Android phones can join too.

Day plan and contacts 1.2

What it's for: a light call sheet everyone has on their phone, and the crew's contacts.

Before you start: switch on Day plan (Producer, Production manager and Assistant director roles have it).

  1. New day plan. Fill in Title (shoot, day number), the day, General call and Wrap (Android: write times as 05:30 and the day as 2026-10-31).
  2. Add Calls (Who (person or department) and a time), the Unit base, and locations with Add a location or Where I am now. Sun times, golden hour and weather fill themselves in for each location (Android: Fetch the forecast).
  3. Set the Hospital (Choose hospital from places), contacts (Add a contact), Safety notes (radio channel, muster point, evacuation plan) and Notes for everyone. From 1.3 a new plan starts with the country's emergency number and air ambulance from its country pack.
  4. Save. On iPhone with a crew shoot, send it to the crew; each person taps Got it so you can see who's read it. Otherwise Share as text or PDF for WhatsApp.
  5. Tomorrow: Duplicate. At the end of the day: Wrap report for today (PDF).

Contacts (Crew list before 1.6): people who join a crew shoot add themselves; Add someone for drivers, fixers and anyone without the app. Share crew list (CSV).

Where it goes: day plans and the contacts stay on the phones and in the PDFs and CSVs you share; nothing from them goes into the rushes.

Shot list 1.2

What it's for: a list of wanted shots, sorted by when the light each one needs next comes round.

  1. Add a shot: Number (12B), what it is, and where (one of today's named places, or Where I am now).
  2. Set Camera points (° from north); on iPhone, Where I'm pointing reads the compass.
  3. Choose the Light it needs (golden or blue hour, morning or evening; low sun; high sun; full dark; any daylight) and where the Sun should be: behind the camera (front-lit), in front (backlit, silhouette) or to the side. Add the priority, Lens / frame and Notes, then Save.
  4. The list sorts itself by the next window ("Next: …", or "Not in the next 14 days").
  5. When it's done, Mark as shot.

Shared on a crew 1.6: once you've joined a crew (My crew), the shot list is the crew's. Everyone sees the same shots, who added each one and who ticked it. Anyone can mark a shot as shot; whoever added it, and the producer, can change or delete it. If you joined with a list already made, Send my list to the crew shares it. Shotlore at base shows the list in Crew online, where Put it in this job's shoot report adds it to the report. On your own, nothing leaves the phone.

What you get: Share the shot list (CSV) (Android: Send the shot list (CSV)). Off a crew it stays on the phone; nothing goes into the rushes.

If it goes wrong: without a camera direction, the sun's side can't count; Field says Set the camera direction for the sun's side to count.

Safety and check-ins 1.2

What it's for: knowing where everyone is, getting help fast, and seeing who hasn't come back.

Before you start: fill in your emergency card and add local numbers while you have time.

  1. My emergency card: My emergency card: blood group, allergies, medication, conditions a medic should know, next of kin, evacuation cover. On iPhone it stays private unless you tick Share with my crew shoot. In an emergency, Show to a medic (Android: Send my emergency card).
  2. Numbers: the country's emergency numbers are listed with their source (from 1.3, from the country pack). Add your own with Add a number (conservancy ops room, insurer…).
  3. Going out: I'm going out, with where, with whom and a back-by time. On iPhone it goes to the crew shoot; on Android it goes to base as a message (Save and tell base), with a reminder on your phone.
  4. Back: I'm back (iPhone also Safe; Android Tell base you're back). On iPhone, base sees anyone overdue on the crew shoot.
  5. Where I am: your position as decimal, degrees-minutes-seconds and Plus Code, ready to read out. Send my position (SMS, WhatsApp…).
  6. Help: iPhone I need help: tell the crew tells the crew shoot at once; Android I need help sends a message with your position.
  7. Nearest help (iPhone): Find the nearest hospitals and airstrips.

Where it goes: on a production shoot (shoot sync, from 1.4), check-ins and trail reports go to the shoot folder with the day. From Shotlore 0.7.7 the coordinator's Wrap report… in Shoot sync lists each person's check-ins (out, back, overdue at wrap, help) and the trail reports, and counts sightings without naming species.

Risk assessments 1.2

What it's for: a written risk assessment the crew has been briefed on.

  1. Safety › Risk assessments › New risk assessment. It starts from a remote and wildlife template; give it a title, the production and places.
  2. Go through each hazard: who could be hurt, likelihood × severity (5 × 5), what's done about it, and the owner. Mark rows that don't apply Not applicable to this shoot; Add a hazard for anything missing.
  3. Write the Emergency plan (hospital, evacuation, numbers, muster point).
  4. Brief the crew, then Record who was briefed (Android: Add to briefed).

What you get: iPhone Share the risk assessment (PDF) and Share as a spreadsheet (CSV); Android Send as text (WhatsApp) and Send as a spreadsheet (CSV).

Permits and licences 1.2

What it's for: every permit to hand at the gate, with warnings before one runs out.

  1. Add a permit or licence. Choose the kind: filming licence, park or conservancy permit, drone authorisation, remote pilot licence, medical, insurance, work permit or visa, carnet, location agreement or other.
  2. Fill in the number, who issued it, the holder, what it covers, Valid from and Expires. On iPhone, add a photo of the document.
  3. Save.

What you get: reminders 30 days, 7 days and the day before expiry, and a warning of gaps, such as a drone day with no valid remote pilot licence. On iPhone, show the photo bright at the gate, no signal needed. Android exports the list as CSV.

Drone 1.2

What it's for: a flight log that can't be quietly changed, plus the checks before each flight.

Before you start: switch on Drone (the Drone pilot role has it). Add your remote pilot licence and drone authorisation under Permits.

  1. Add an aircraft (name, model, registration, serial, last 12-month inspection) and Add a battery for each pack (label and cycles; retire old ones).
  2. Before each flight, run the Pre-flight checklist and check the wind against your limit (gusts are checked separately). iPhone uses Apple Weather plus the NOAA Kp index; on Android, type the wind in.
  3. Tap Take off and fill in the flight details.
  4. Tap Landed when it's down (Android: Land, then Save to the flight log). Each entry is sealed to the one before (SHA-256), so any later change to the log shows.

What you get: iPhone Export logbook (PDF and CSV); Android Send the flight log (CSV). Also: post-flight and emergency checklists, wildlife distances, and nearby airstrips. In Kenya, Field checks the KCAA wind cap (Beaufort 4) and the 7 km and 10 km aerodrome rings; elsewhere, from 1.3, it shows the country pack's drone rules, a link to the regulator and airspace where published. Flights stay on the phone; the drone's own position comes into Shotlore from its flight files, not from Field.

If it goes wrong: if Field says an entry doesn't match its seal, the log was changed outside Field. Keep the export you already sent.

Camera report and cards 1.2 1.4.1

What it's for: logging every take against its clip name, so scene, take, circled and notes arrive on the clips in the edit.

Before you start: set up the camera once: body, lens, stop, recording format, FPS, shutter, ISO, white balance and filters, and the card and clip names (iPhone: Card label (e.g. A004), Clip prefix and digits, so Field names the next clip for you). Every new take starts from these settings.

  1. Before each take, fill in Scene, Slate (iPhone) and Take.
  2. After the take: on iPhone tap Log take …: clip …, ticking Circled (good take) for a keeper; on Android save the take, or use Next take, circled.
  3. When a card comes out: Next card. It goes into the shot log as a card change, and the next take starts on the next card.
  4. A circled take also goes into the shot log ("Circled A001C007 …"), on both phones from 1.4.1.
  5. Cards: where's each one? (iPhone and Android, Field 1.5) follows each card from in camera to offloaded, verified on two drives, safe to format, and Formatted and back in kit, with who, when and where at each step. Next card in the camera report logs cards by itself. The steps travel to Shotlore with the day, and when Shotlore on a Mac or PC has copied and verified a card it tells the phone back, at the next Wi-Fi sync or through the shoot folder, so the card moves on to Verified or Safe to format without anyone typing. Never format a card until it says Safe to format.

What you get: iPhone Export report (PDF, CSV, ALE); Android Send the camera report (CSV) and Send the camera report (ALE, for the edit). From Field 1.4.1 every take also travels with the day; Shotlore 0.7.7 matches it to the clip with the same name and fills in scene, take, circled and notes (camera and lens included) for the shot log, ALE, Resolve, Premiere and Final Cut exports. A report shared by hand can be imported in Shotlore's Deliver step (Import a log…); Field's ALE and CSV are recognised without mapping columns.

If it goes wrong: takes are matched by clip name only, so the clip name must be the one the camera writes (A001C007, not "take 7"). A log imported in Shotlore wins over Field for the same clip.

Sound log 1.2 1.4.1

What it's for: a sound report, with each recording's notes landing on its sound file in Shotlore.

Before you start: set the recorder, mics, format and track layout once (iPhone: Kit preset); they carry to every take.

  1. Tap the kind of recording to start it: Sync take, Wildtrack, Atmos, Room tone, Effects, Wild line or Drop rig (Android: choose the type, then Start).
  2. When it ends, tap Stop and log it (Android: Stop). Fill in the File name / number exactly as the recorder names it, the scene and take, Circled, Species heard, conditions and notes, and save. Stopping also adds a line to the shot log ("Wildtrack 10:00–10:05").
  3. Missed one? Add it afterwards (Android: Add one by hand).
  4. Timecode: a calculator (drop frame included) and the drift between two boxes; on iPhone, I've just jammed: log it and Remind me to re-jam every 4, 6 or 8 hours.
  5. Frequency plan: Add a channel for each radio mic; Field flags channels too close together.

What you get: iPhone Sound report (PDF and CSV); Android Send the sound report (PDF and CSV). The frequency plan exports as CSV (iPhone also as text). From Field 1.4.1 each take travels with the day, and Shotlore 0.7.7 fills in scene, take, circled and notes (type, tracks and species) on the sound file with the same name. A sound report CSV shared by hand is recognised in Shotlore's Import a log….

If it goes wrong: a take with no file name can't be matched to a sound file; it stays in the report.

Light and power 1.2

What it's for: the sums a gaffer, DIT or camera assistant does on set. Everything is worked out on the phone; no signal needed.

  1. Open Light and power and pick a tool: Light left today; Flicker-safe shutters (safe shutter angles at your frame rate); Power, cable runs, generators (load, breaker, cable run and voltage drop, generator size); Data and offload planner (bitrate, hours rolled, cameras and shoot days give the drives and copy time); Heat stress.
  2. Battery board (V-mounts, lights, monitors): Add a battery with its label, capacity (Wh) and what it powers, then mark each one charged, in use, flat or charging. Field warns 15 minutes before one in use should be done.
  3. On iPhone, Same sun again (pickups) finds when the sun will next be where it was for a logged take.

Where it goes: nowhere; these stay on the phone.

Scout reports 1.2

What it's for: a recce report with photos that say where they were taken and which way they faced, and the spot saved for the shoot.

  1. At the spot: Scout here. Give it a name.
  2. Take a stamped photo as many times as you need: each photo carries its position, bearing, tilt and the sun.
  3. Choose a Checklist (general recce, tech scout, drone site, or wildlife and hide) and work through it; add Anything else and the Shoot date, which shows the sun times for that day.
  4. Add to my places to keep the spot.
  5. Scout report PDF to share it.

Where it goes: the PDF is shared from the phone. A spot added to your places travels with the day like any named place: in Shotlore it becomes a named place, with the photos as reference photos.

Sightings, camera traps, rangers 1.2

What it's for: a record of what was seen and where, without giving away sensitive animals; camera traps checked on time; and reports to the rangers.

Sightings

  1. Log a sighting. Search the offline East African list in English, Swahili or Latin (or type a species not in the list), set how many, what it was doing and your confidence.
  2. Sensitive species are marked Sensitive (keep the position private) by default; you can tick it for any sighting.
  3. Save. The sighting also goes into the shot log.

Where it goes: iPhone Export sightings (CSV), with Hide sensitive species in exports; Android Send the crew copy (CSV) or Send a shareable copy (sensitive hidden). In Shotlore the shot log line becomes a Field note on the clips shot at that moment ("Sighting (sensitive)" without the species, for sensitive ones).

Camera traps

  1. At the trap: Deploy a trap here. Add the camera, its settings, the target, facing and height, and how often to check it.
  2. Field reminds you at 08:00 on the day each is due. At the trap: Checked (battery, card, triggers). Go there leads you back.
  3. When it comes in: Retrieved.

Where it goes: Export deployments (Camtrap DP CSV).

Report to rangers

  1. Report to rangers: snare, injured animal, carcass…. Choose what it is: a snare or trap, an injured or sick animal, a carcass, signs of poaching, fire, a fence down, or animals and people in conflict.
  2. Send it to the ops room with your exact position, by WhatsApp or SMS (with a photo on iPhone).

Where it goes: Reports for the ops room (CSV). Ranger reports and traps don't go to Shotlore.

Releases, receipts, kit 1.2 1.4.1

Releases

What it's for: a signed release for each person, place or property, and the release written into every file it covers.

Before you start: agree the wording with the production. The starting text is plain, not legal advice: use your own lawyer's wording for broadcast.

  1. Releases › under New release, choose the kind: Person (appearance), Minor (with parent or guardian), Location, Property / artwork or Consent given on camera.
  2. Fill in Production and Production company (kept for the next one), the name (or the location or property and its Owner or authorised person), Parent or guardian for a minor, Phone or address, Fee (if any) and Language read in.
  3. Read the Terms to the person, in their language if needed. Edit them if agreed; Reset to the starting text puts them back.
  4. The person signs with a finger under Signature. For consent given on camera, type the Clip where consent is given exactly as the camera names it, instead of signing.
  5. Add a Witness and a photo if you like, and Save. The release keeps the time and position, and gets a short ref (R- and eight characters) shown in the list and printed on its PDF.
  6. Tap a release to share its PDF, or Share all as PDF.

Where it goes: from Field 1.4.1 each release travels with the day by any route (Sending days): its ref, kind, the name or place, the on-camera clip, whether it's signed, and when and where. The contact details, fee, guardian, witness, terms, signature and photo stay in the PDF on the phone. In Shotlore 0.7.7:

  1. Add the day in Files & track. The log says how many releases came with it.
  2. Credits & places › Releases lists them. Each covers the files shot from two hours before signing to two hours after, on the corrected clock; change the times, or open Files… to Take out a file or add one by name. Consent given on camera covers the clip named on the phone.
  3. Save credits writes the IPTC PLUS release fields into the stills (Model Release Status and ID for people, Property Release Status and ID for places and property; the ID is the ref on the PDF). Signed releases read "Unlimited"; an unsigned one makes it "Limited or Incomplete".
  4. In Deliver, clips get the same fields in their XMP sidecars, the shot log gets Model release and Property release columns, the library manifest carries them per file with the release register, and releases.csv (the register: every release and the files it covers) is saved with the exports. Save the release register (CSV)… in the Releases panel saves it on its own.

If it goes wrong: files with no camera clock can't be covered by time; set the clock or add them by name. Files no release covers get no release fields at all: Shotlore never writes "None", so check the panel's file counts before you deliver.

Receipts and mileage

  1. Add a receipt: amount, currency, category, who was paid, the M-Pesa / bank reference and a photo of the receipt.
  2. Mileage: on iPhone, Mileage from a recorded day takes the distance from a day's track; on Android, enter the distance and Rate per km.
  3. Export: iPhone Export (PDF with receipts, and CSV); Android Send the expenses (CSV).

Kit list

  1. Add an item: description, make, serial number, quantity, value each, country of origin, weight, case and department.
  2. When it goes out, fill in who has it; clear it when it's back.
  3. Export in carnet and insurance shape: iPhone Export kit list (CSV); Android Send the carnet / insurance list (CSV).

Receipts and kit stay on the phone and in what you export.

Country packs 1.3

What it's for: the right emergency numbers, drone and filming-permit rules and basics for the country you're in. Field has Kenya built in; other countries come as free, signed packs.

  1. Before you travel: Settings › Country packs, find the country you're going to and download it while you have signal.
  2. In a country without its pack, Safety and Drone offer it: tap Get it. Within about 15 km of a border, Field offers the neighbour's pack too.
  3. Updates show under Updates; Remove a pack you no longer need.

A pack has the country's emergency and air-ambulance numbers (each with its sources and how sure they are), drone and filming-permit summaries with links to the regulator, the basics (dialling code, time zones, plugs, mains, driving side, currency), and airspace where it's published. Packs so far: Kenya, Tanzania, Uganda, Rwanda, Ethiopia, South Africa, Botswana, Namibia, Zambia, Zimbabwe, Mozambique and Madagascar. Field works out the country on the phone; downloading a pack sends nothing about you. Airspace is from openAIP and is not for navigation: always check the national AIP and NOTAMs.

What each tool exports

TooliPhoneAndroidInto Shotlore with the day
DaysGPX, iCloud Drive, AirDrop, Wi-Fi link, shoot folderGPX, any share app or Files, Wi-Fi link, shoot folderTrack, places, photos, shot log
Day planText, PDF, wrap report PDFText, PDF, wrap report PDF–
ContactsCSVCSV–
Shot listCSVCSV–
Check-ins and trail reportsCrew shoot; shoot folderMessages to base; shoot folderWrap report (shoot sync, 0.7.7)
Risk assessmentPDF, CSVText, CSV–
Permits–CSV–
Drone logPDF, CSVCSV–
Camera reportPDF, CSV, ALECSV, ALETakes onto clips (1.4.1 / 0.7.7); card log steps, with verified cards told back (1.5 / 0.7.9)
Sound reportPDF, CSV; RF plan CSV and textPDF, CSV; RF plan CSVTakes onto sound files (1.4.1 / 0.7.7)
SightingsCSV, sensitive species hidden if you chooseCrew copy and shareable copy (CSV)Field notes on clips
Camera trapsCamtrap DP CSVCamtrap DP CSV–
Ranger reportsText with photo; CSV for the ops roomText; CSV for the ops room–
Scout reportPDFPDFNamed place and photos, after Add to my places
ReleasesPDFPDFIPTC PLUS fields and the register (1.4.1 / 0.7.7)
ReceiptsPDF with receipts, CSVCSV–
Kit listCSVCSV (carnet / insurance)–

iPhone and Android compared

Both record the day, name places, keep the shot log and the card log, show the clock, work out the sun, moon and tides, find your way back along your own tracks, have the camera tools, and (from 1.2 and 1.3) the role picker, day plans, contacts, recording hours, shot list, safety, risk, permits, drone log, camera and sound logs, light and power, night sky, voice notes, reference photos, scout reports, sightings, camera traps, releases, ranger reports, receipts, kit, weather (Apple Weather on iPhone; MET Norway on Android, when switched on) and country packs. From 1.4 both have Share with Shotlore and shoot sync; from 1.4.1 both send releases and camera and sound takes with the day, and both export the camera report as ALE and the sound report as PDF.

From 1.6 both also have the same tabs, the shared crew shot list, Hand over a camera and I'm with…, offline country maps, Known tracks and area packs, places sent to you, mileage from a recorded day, the nearest-hospital list and the medic's card.

Only on iPhone: iCloud handoff, the older iCloud crew shoot (My crew works on both), the slate field in the camera report, a satellite basemap and road and water checks when retracing, and visibility in the forecast. Only on Android: the offline map is the map on every map screen and is offered when you arrive somewhere new; on iPhone it opens from Map of the day. Voice-note words on Android need Android 13 or later. Android uses the network only for country packs, maps you choose to download, weather when switched on, the crew relay when you join a crew, and the Wi-Fi link to the computer.

iPad: for recording a track, use a Wi-Fi + Cellular model, which has GPS. Questions or ideas: hello@shotlore.app or suggest a feature.